 |
|
|
The GF wheel is an ultra-high-density grinding
wheel manufactured by our patented technique.
Unlike conventional flap wheels that grind
work surfaces by hitting with blades, our GF wheel grinds
it by rubbing. As a result, a much higher grinding ratio is
obtained compared with that obtained by flap wheels. The GF
wheel is highly evaluated as an ideal abrasive for special
alloys known as a difficult material to grind. In order to
gain maximum grinding results with the GF wheel, highly intensified
pressure should be applied on the work.
If a drawing of an object to be ground is
provided, we can trim the outer periphery of the wheel so
as to produce an optimum wheel for grinding it. Although general-purpose
GF wheels are made exclusively for wet grinding, we have also
developed a new type for dry grinding.
More Detail
|
|
|
 |
|
|
Manufactured by our patented technique, the NF wheel is an
abrasive wheel with excellent adherence to work surfaces.
Conventional flap wheels grind objects to
be ground by hitting them on their surfaces with blades. Our
NF wheels have braided impeller blade tips, eliminating irregular
flapping movements of the blades. The NF wheel is characterized
by its adherence to work surfaces and is best suited for middle
finishing.
Addition of solid abrasives can prevent scattering
about of abrasive powder, which is retained between blades.
|
|
 |
|
| The SS wheel is a
buffing wheel for universal use, easy to handle. This type of
buffing wheel has been a popular abrasive. We offer a wide variety
of SS wheels, depending on different uses and purposes. For
example, when work surfaces are uneven or have slow curves,
we can provide SS wheels having soft impeller blades. To grind
corners or narrow ditches, we suggest SS wheels with thin and
hard blades. We select optimum materials to obtain optimum grinding
results for every customers' satisfaction. |
|
 |
|
| The SF wheel is a
buffing wheel we have developed with an innovative idea; namely
to press soft abrasive cloth hard on work surfaces with high
pressure. We have also proved that conventional idea that soft
abrasive cloth lacks in polishing quality is unfounded by rolling
up soft abrasive cloth and making it sturdy. The sturdy but
flexible abrasive cloth can maintain applied pressure for maximum
polishing effects. At the same time, softness of the cloth prevents
excessive polishing of work surfaces. The SF wheel is highly
reputed as suitable for groundwork polishing prior to plating
and mirror finishing of stainless steel cooking pans. |
|
 |
|
|
The NS wheel is a windmill type buffing wheel.
Given a mild umbrella-shaped curve, this wheel is especially
suited for burr removal from pipe ends. By using two wheels,
facing opposite directions, the NS wheel can also be applied
for heavy duty grinding. Appropriate adherence to work surfaces
and air-cooling effects of the wheel prevent over-heating
during grinding.
We recommend our customers to use the NS wheel
for heavy duty grinding under a lower pressure than it for
GF wheel.
|
|
 |
|
| The ML belt is a multiple-layer
abrasive belt, with blades of abrasive cloth inserted into the
base material of the belt. The life of this belt is 20 to 40
times longer than that of conventional abrasive belts. While
cutting and polishing quality of conventional abrasive belts
quickly deteriorates, the ML belt keeps polishing quality and
surface roughness for a longer period of time. This abrasive
tool is particularly effective for removing protruded parts,
including welding beads and burrs, which conventional abrasive
belts have been unable to properly remove. |
|
 |
|
|
The FP-cool wheel is a abrasive wheel that
proves most effective in processing environment under high
temperature.
High temperature causes rapid deterioration
of abrasive cloth, sometimes resulting in falling off the
grinding blades during processing. We suggest that the FP-cool
wheel be used in a working environment under high temperature.
Some air vents are bored about the center of the FP-cool wheel,
which produces self-cooling effect as it rotates.
|
|
 |
|
|
The WIDEMAX is a large-size flap wheel manufactured by our
newly developed technique, taking into consideration safety
and industrial waste disposal.
Large-size flap wheels with a width of 200
millimeters or more are difficult to manufacture, and multiple
reinforcements are necessary. The new technique we have developed
to solve these problems is to fasten abrasive cloth around
the wheel. This has allowed us to eliminate reinforcing metal
tools from the wheel. Movements of abrasive blades are more
flexible than those of conventional flap wheels. Grinding
quality and adherence to work surfaces have also been greatly
enhanced.
|
|
|
